PC Powerzone - Serving Power Users since 2001 - American owned & operated - No off-shore outsourcing

Replace your HP Pavilion 884n Power Supply.
Designed to deliver more power than the original, this enhanced 470 Watt Power Supply is the perfect replacement for your HP Pavilion 884n computer. Our replacement HP power supply offers dual 12V power rails to deliver stable power to demanding components, and both 20 and 24-pin ATX motherboard power connectors, and other component support for proper (and safe!) motherboard compatibility.

Get your HP replacement power supply, backed by Athena’s 3-year warranty. Out of the box compatibility with the HP Pavilion computer model. Fits your HP computer without modification! Simply unplug the cables from your old power supply taking note on home many and where the cables went. PcPowerZone recommends that you draw a simple picture of your HP computer showing what plugs go where for anyone replacing their power supply for the first time. After unplugging your cables, simply unscrew the 4 screws that hold the dell power supply into your dell computer. The power supply will lift out (be careful that it does not fall into your computer). Simply install the replacement dell power supply in the reverse order!

Features:

• 100% Compatibility with HP Pavilion 884n computers
• 470watts of power, enough power to feed energy hungry system upgrades
• High efficiency - Low Ripple & Noise
• Output over voltage protection
• Short circuit protection on all outputs
• Reset table power shut down
• Approved by UL, CB & CE
• Vacuum-impregnated transformer & 100% Hi-pot tested
• RoHS approved - 100% burn-in under high ambient temperature
• FCC part 15 subpart J Class B at 115VAC operation & CISPR 22 Class B at 230 VAC operation

How to replace your HP Computers power supply:

• Open your computer case (2-4 screws hold on the case panel to allow access to inside of computer)
• Remove the 4 screws on the backside of your computer, which hold the power supply in
• Remove old power supply, noting which plugs go where
• Insert replacement power supply exactly as the old unit was installed replacing the 4 screws and all power cables as connected with the old unit. It is ok to have extra connectors and wires that are unused (this power supply comes with a 20 pin motheroard connector AND a 4 pin connector, both are used on some systems, while only the 20 pin is used on others... simply ignore the extra, un-needed wires).

Warranty: 3 year Warranty

Replace your HP Pavilion 8860 Power Supply.
Designed to deliver more power than the original, this enhanced 470 Watt Power Supply is the perfect replacement for your HP Pavilion 8860 computer. Our replacement HP power supply offers dual 12V power rails to deliver stable power to demanding components, and both 20 and 24-pin ATX motherboard power connectors, and other component support for proper (and safe!) motherboard compatibility.

Get your HP replacement power supply, backed by Athena’s 3-year warranty. Out of the box compatibility with the HP Pavilion computer model. Fits your HP computer without modification! Simply unplug the cables from your old power supply taking note on home many and where the cables went. PcPowerZone recommends that you draw a simple picture of your HP computer showing what plugs go where for anyone replacing their power supply for the first time. After unplugging your cables, simply unscrew the 4 screws that hold the dell power supply into your dell computer. The power supply will lift out (be careful that it does not fall into your computer). Simply install the replacement dell power supply in the reverse order!

Features:

• 100% Compatibility with HP Pavilion 8860 computers
• 479watts of power, enough power to feed energy hungry system upgrades
• High efficiency - Low Ripple & Noise
• Output over voltage protection
• Short circuit protection on all outputs
• Reset table power shut down
• Approved by UL, CB & CE
• Vacuum-impregnated transformer & 100% Hi-pot tested
• RoHS approved - 100% burn-in under high ambient temperature
• FCC part 15 subpart J Class B at 115VAC operation & CISPR 22 Class B at 230 VAC operation

How to replace your HP Computers power supply:

• Open your computer case (2-4 screws hold on the case panel to allow access to inside of computer)
• Remove the 4 screws on the backside of your computer, which hold the power supply in
• Remove old power supply, noting which plugs go where
• Insert replacement power supply exactly as the old unit was installed replacing the 4 screws and all power cables as connected with the old unit. It is ok to have extra connectors and wires that are unused (this power supply comes with a 20 pin motheroard connector AND a 4 pin connector, both are used on some systems, while only the 20 pin is used on others... simply ignore the extra, un-needed wires).

Warranty: 3 year Warranty

Replace your HP Pavilion 8300 Power Supply.
Designed to deliver more power than the original, this enhanced 475 Watt Power Supply is the perfect replacement for your HP Pavilion 8300 computer. Our replacement HP power supply offers dual 12V power rails to deliver stable power to demanding components, and both 20 and 24-pin ATX motherboard power connectors, and other component support for proper (and safe!) motherboard compatibility.

Get your HP replacement power supply, backed by Athena’s 3-year warranty. Out of the box compatibility with the HP Pavilion computer model. Fits your HP computer without modification! Simply unplug the cables from your old power supply taking note on home many and where the cables went. PcPowerZone recommends that you draw a simple picture of your HP computer showing what plugs go where for anyone replacing their power supply for the first time. After unplugging your cables, simply unscrew the 4 screws that hold the dell power supply into your dell computer. The power supply will lift out (be careful that it does not fall into your computer). Simply install the replacement dell power supply in the reverse order!

Features:

• 100% Compatibility with HP Pavilion 8300 computers
• 475watts of power, enough power to feed energy hungry system upgrades
• High efficiency - Low Ripple & Noise
• Output over voltage protection
• Short circuit protection on all outputs
• Reset table power shut down
• Approved by UL, CB & CE
• Vacuum-impregnated transformer & 100% Hi-pot tested
• RoHS approved - 100% burn-in under high ambient temperature
• FCC part 15 subpart J Class B at 115VAC operation & CISPR 22 Class B at 230 VAC operation

How to replace your HP Computers power supply:

• Open your computer case (2-4 screws hold on the case panel to allow access to inside of computer)
• Remove the 4 screws on the backside of your computer, which hold the power supply in
• Remove old power supply, noting which plugs go where
• Insert replacement power supply exactly as the old unit was installed replacing the 4 screws and all power cables as connected with the old unit. It is ok to have extra connectors and wires that are unused (this power supply comes with a 20 pin motheroard connector AND a 4 pin connector, both are used on some systems, while only the 20 pin is used on others... simply ignore the extra, un-needed wires).

Warranty: 3 year Warranty