Buttkicker Home TH Seating Pak BK-HTSEP

This ButtKicker Kit includes everything necessary to wirelessly connect and power up to 4 ButtKicker LFE's to a home theater system:

- 1 BKA-1000-4 Power Amplifier
- 1 BK-QCP Quick Connect Quick Select Package
- 1 BK-LINK Wireless Package (RF)

Designed specifically to power the ButtKicker LFE and Concert, the BKA1000-4 is an incredible value, chock full of features designed to make the installation and operation of the ButtKicker easier and more affordable. And because it is 120V-240V (switchable), it can be used around the world.

Easier: No preamplifier is required. For home theater, just use a RCA cable to go from your processor's subwoofer out to the RCA input on the ButtKicker Amplifier (use a inch Y inch connector if your processor has only one sub out). Then, use 12 gauge speaker wire from the amplifier to the ButtKicker. It's as simple as that - plug'n play.

More Affordable: With 1100 watts into 4 ohms and 2100 watts into 2 ohms, the BKA1000-4 is able to power one or two 4 ohm ButtKicker Shakers (when wired in parallel).

More Value - Low cutoff and variable high cutoff filters: Not only does the ButtKicker Amplifier have over 2100 watts of power, it adds low and high cutoff filters at no additional cost.

ButtKicker Link: Wirelessly send and receive audio signal from an A/V processor to the ButtKicker Power Amplifier. Can also be used with powered subwoofers.

Quick-Connect Quick-Select Package: Easily connect up to four ButtKicker LFE's to one ButtKicker Power Amplifier in a simple inch plug 'n play inch fasion. It also functions as an inch on/off inch selector switch for the ButtKickers.

BKA-1000-4 Amplifier Specifications

* 1100 Watts @ 4 ohms
* 2100 Watts @ 2 ohms - will power 2 ButtKicker LFEs wired in parallel, and 4 ButtKicker LFEs used in individual home theater seats
* 1050 Watts per ButtKicker when two units are wired in parallel
* Class D switching technology
* Variable High Cutoff: 40 to 160 Hz
* Low Cutoff: 25 Hz, switchable
* RCA and 1/4 inch inputs with 160mVolt and 1.25 Volt sensitivities eliminates the need for a separate pre-amplifier
* Five way binding post output
* 115V-230V, switchable, worldwide usage
* Convection cooling (no fan)
* Dimensions (W x L x H): 12 inch x 11 inch x 4.375 inch
* Weight: 25 lbs

How They Work

ButtKicker low frequency audio transducers are in a class of their own. Based on a revolutionary, patented design that is more musically accurate, more powerful and longer lasting than voice coil shakers and other tactile devices, ButtKicker brand low frequency audio transducers allow the user to feel powerful bass without excessive volume. The magnetically suspended piston moves precisely in response to amplified audio signal input. This 3.25 lb mass generates tremendous force that is accurately transferred to whatever the housing is attached to.

ButtKicker brand transducers are virtually indestructible and maintenance-free, with many thousands of units in service for over six years... without failure. The ButtKicker brand family of low frequency transducers is used by the world's most demanding customers - IMAX, Disney, Universal Studios, professional and amateur musicians, theme parks and attractions, home theater professionals and enthusiasts, computer and console gamers and car audio installers.