Cables Unlimited Ultra ATA/133 RAID PCI Controller Card
Zip Code:
Calculate Shipping Rates Here!
Cables Unlimited Ultra ATA 133 RAID PCI Controller Card
Add performance to your computer with this Ultra ATA 133 PCI Controller Card from Cables Unlimited. This card automatically fine tunes to the best performance for each ATAPI/IDE device and features RAID support. Card also supports up to four IDE devices and is Plug and Play!
Specifications
Ultra DMA 133MB operation per ATA channel
Supports up to 66MHz PCI bus clock
Supports PCI 2.2
Two independent ATA channels per one PCI function
Dedicated ATA bus
Independent ATA clock from PCI bus
256 Byte FIFO per ATA channel
Independent large FIFO
Supports all ATAPI CD ROM, DVD ROM, CD-R, CD-RW, LS-120, MO, Tape and Zip devices
Easy Plug and Play feature
Supports up to four IDE devices (coexists with on-board IDE)
Supports hard drive with capacity larger than 30GB
Supports RAID function (RAID 0, 1, 0+1)
Supports Windows 95, 98, NT 4.0, 2000, XP and DOS
Supports booting function with Flash Memory interface
Automatically fine tunes to the best performance for each ATAPI/IDE device
Concurrent PIO and bus master access (ATA port accessible during DMA transfer)
Small foot print 144-pin LQFP package (dedicated parallel EPROM pins)
Embedded serial resistor on chip for ATA specification
Regular price: $24.99 Sabrent SBT-RDIT ATA 100/133 IDE RAID PCI Controller Card Any system with a PCI bus interface can simply add the 100/133 IDE/ATA interface by adding a card with the PCI card and loading the driver into the system. Features Achieves High-Speed data Transfer Rates up to 133/100MB/sec Internal 32 bit PCI Card ADD 2 Ultra ATA 133/100 ports Supports ULtra ATA 133/100/66/33, EIDE/Fast ATA 2 IDE & ATAPI Devices Coexists with on board IDE ports and connects up to 4 IDE/ATAPI Devices
Specifications
|
Regular price: $24.99 Reliable and Eye-Pattern Proven
Minumum System Requirements
Specifications Provides 2 Brackets to Support Low profile PCI and Regular size PCI in one card Breaks Capacity-Limit to Support HDD larger than 137GB Dual high speed Serial ATA interface ports, each supporting 1st generation Serial ATA data rates 1.5Gb/s Fully compliant with Serial ATA 1.5G specifications Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to 2 drives Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives Supports Spread Spectrum in receiver Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes Compliant with PCI Specification, revision 2.2 Integrated PCI DMA engines 32 bit, 33/66MHz fully compliant PCI host interface Complete with drivers for Windows 98, Windows Millennium, Windows NT 4.0, Windows 2000 and XP Acts as NON-RAID when not BIOS configured RAID RoHS Compliant
|
 |  |
© Copyright 2009 PC Power Zone. All Rights Reserved.
Website Design by Solid Cactus