PC Powerzone - Serving Power Users since 2001 - American owned & operated - No off-shore outsourcing

GF-LGT II Features:

Elevator Trim

Aileron Trim

Rudder Trim

Landing Gear Switch with Locking Feature, Up/Down and Center positions

Flaps Up / Down Switch

3 dual-color LEDs showing state of Landing Gear

Configurable 3-position toggle switch

The GF LGT II from GoFlight is designed after the popular GF-LGT module, but features a greater range of controls to make your simulated flying sessions more realistic than ever.

The GF-LGT II features AILERON and RUDDER trim, locking Gear Up / Down lever, a more robust Flaps Control switch, and a generic 3-position toggle switch that can be programmed for various functions such as fuel tank select.

Gear position is shown on the panel using three dual-color LEDs, which illuminate green when gear is down and locked, red when gear is in transition, and turn off when gear is up and stowed. The GF-LGT panel requires 4" of vertical space in the module bay.

Module Dimensions: 4" tall, 7.25" wide, 3" back clearance. The mounting hole centers are 1.5" down from the top edge of the panel, 6.75" apart, and 0.25" from the left and right edges of the panel.

The GF-LGT II is rack-mountable and available in gray powder coat finish.

The GF-MCP Advanced Autopilot Module offers realistic simulation of a wide range of autopilot devices typically found in general aviation and commercial aircraft. Using the GF-MCP, it's simple to set the nav course, heading, speed, vertical speed, and altitude of your simulated aircraft.

For sim pilots who enjoy flying the "heavy iron", the GF-MCP has advanced features like airspeed hold, speed readout in either knots indicated airspeed or MACH number, autothrottle sync capability, and a disengage control bar. Seven lighted pushbuttons are used to control autopilot engagement and various modes of flight from takeoff to touchdown. Dimensions: 4" tall, 7.25" wide, 3" back clearance. The mounting hole centers are 1.5" down from the top edge of the panel, 6.75" apart, and 0.25" from the left and right edges of the panel.

THE AFFORDABLE CHOICE FOR AIRLINER ENTHUSIASTS

The GF-MCP Pro features a Boeing 737-style panel with full control complement. When used with FS2004 add-on software such as Project Magenta, the GF-MCP Pro enables full simulation of a Boeing 737 MCP. The GF-MCP Pro is also compatible with built-in FS2004 aircraft and most freeware or commercially available add-on aircraft.* Dimensions: 16.25 wide x 2.7 high.

The GF-MCP Pro features the following controls:

Independent Captain and F/O COURSE knob and display

Independent Captain and F/O Flight Director on/off toggles with indicator

Autothrottle on/off toggle with indicator

Autothrottle N1 and SPEED buttons

C/O button for SPD display selection of IAS or MACH

SPEED Knob and display

HEADING knob and display with integrated HDG HOLD push function

HDG SEL button

VNAV and LNAV buttons

ALTITUDE knob and display

VOR LOC, APP, ALT HOLD and ALT INTV buttons

VERTICAL SPEED wheel control and display

V/S button

A/P CMD A, CWS A, CMD B, and CWS B buttons

DISENGAGE control bar

The GF-MCP Pro connects to a USB port on your computer. Includes all software for compatibility with Microsoft Flight Simulator 2004 and Project Magenta; NOW compatible with X-Plane, too!