PC Powerzone - Serving Power Users since 2001 - American owned & operated - No off-shore outsourcing

The GF-MCP Advanced Autopilot Module offers realistic simulation of a wide range of autopilot devices typically found in general aviation and commercial aircraft. Using the GF-MCP, it's simple to set the nav course, heading, speed, vertical speed, and altitude of your simulated aircraft.

For sim pilots who enjoy flying the "heavy iron", the GF-MCP has advanced features like airspeed hold, speed readout in either knots indicated airspeed or MACH number, autothrottle sync capability, and a disengage control bar. Seven lighted pushbuttons are used to control autopilot engagement and various modes of flight from takeoff to touchdown. Dimensions: 4" tall, 7.25" wide, 3" back clearance. The mounting hole centers are 1.5" down from the top edge of the panel, 6.75" apart, and 0.25" from the left and right edges of the panel.

The GF-P8 8 Pushbutton/Indicator Module has 8 programmable pushbuttons and LED indicators. You choose the functions to assign using GoFlight's GFConfig software, and label the buttons using the MagLabels included with each unit. The GF-P8 requires 2" of vertical space in the module bay.

Dimensions: 2" tall, 7.25" wide, 3" back clearance. The mounting hole centers are 0.5" down from the top edge of the panel, 6.75" apart, and 0.25" from the left and right edges of the panel.

There are twenty different panel elements on the RP48 Panel Module all brought together, providing a level of cockpit control never before possible in a 2" tall panel module.

8 Programmable Pushbuttons - See P8 for description. 4 Rotary Control Knobs Each of the control knobs on the RP48 can be used to adjust instrument panel settings such as altimeter, gyro, OBS1 and OBS2, as well as many others. For day and night flying, you can use a RP48 knob to set the brightness level for the displays and indicators on all of your GoFlight modules. When installed in GoFlight home cockpits including GF-45 or GF-166 modules, the RP48's knobs can be programmed as mode selectors, allowing you to select all available avionics modes on the GF-45 and GF-166 modules MagLabels included with each RP48 unit. The RP48 requires 2" of vertical space in a GoFlight module bay, and is compatible with all GoFlight cockpit module enclosures. For mounting in custom cockpits, allow 3" of depth behind your panel.

Dimensions: 2" tall, 7.25" wide, 3" back clearance. The mounting hole centers are 0.5" down from the top edge of the panel, 6.75" apart, and 0.25" from the left and right edges of the panel.