PC Powerzone - Serving Power Users since 2001 - American owned & operated - No off-shore outsourcing

Masscool XWT-PCIE15 2-Port SATA and IDE PCI Express Card
The Masscool SATA/IDE adapter gives you the flexibility of connecting almost any type of drive to your computer via a PCI Express (x1) slot. The board provides up to 3.0Gb/s PCI Express (x1) interface on the host side, fully compliant Serial ATA II ports on the device side to access Serial ATA mobile storage devices and standard media such as Hard Disk drive, floppy disk drive, CD-ROM, CD-RW, DVD, DVD-ROM, etc... 2 SATA port (one external and one internal) and one IDE ATA-133 header (internal).

Specifications

• Supports 1-Lane 2.5Gbps PCI Express bus
  
• 1 port eSATA II external, 1 port SATA II and PATA internal
• Supports 2-port 3.0Gbps SATA II interface
  
• Supports two independent SATA II channels (separate logic and FIFO)
  
• Supports Native Command Queue (NCQ) on SATA II port
  
• Supports Hot Plugging like USB on SATA II port
  
• Supports up to 0, 1, 0+1, JBOD function

What's In The Box

Masscool XWT-PCIE15 2-Port SATA and IDE PCI Express Card Installation Disk SATA Cable

Convert High Capacity SATA Hard Drive
and SATA Storage Device to operate with IDE Host Controller!
Attaches this Mini size Dangle board to the back of all types of Serial ATA Devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, MO.)and make them become IDE Device to work with IDE host Controller. This Ultra ATA-To-1 Port Serial ATA Converter is the solution for converting a Serial ATA device. It features a Serial ATA port to connect SATA devices such as hard drives, DVD-ROM,or CD-ROM drives to a Parallel ATA interface. It supports Serial ATA tansfer rate of up to 1.5 GB/s and supports Spread Spectrum Receiver.

This Bridge Board is a converter solution for the Serial ATA Device. It has a standard 22 pin SATA port which can interface to a Serial ATA device (hard disk, CDROM, DVD, CD-RW, etc). It accepts Parallel ATA (IDE) commands through the 40 pin IDE connector from the host, decodes the commands and converts them to a Serial ATA commands to the device. Response from the device through the SATA bus are deciphered, processed and converted to a prallel ATA protocol and sent to the host. This Bridge board can support HDD larger than 137GB.

The SATA-to-Ultra ATA/133 Converter Board supports the Serial ATA Generation 1 transfer rate of 1.5 Gb/s (150 MB/s) on the serial ATA side and is compatible with Ultra ATA-133 on the parallel ATA side

Specifications

• Compatible with Ultra ATA 133 specifications.
  
• Supports all types of SATA storage devices. (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk, ...)
  
• Complaint with Serial ATA 1.0 specifications.
  
• Supports Serial ATA Generation 1 tranfer rate of 1.5Gb/s.
  
• Supports Spread Spectrum in receiver.
  
• Male/Female Y Large Molex Power connector (8-inch length)
• RoHS Compliant

Features

• Supports any type of SATA150 Device (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk.)
• 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
• Mini Board size (75mm x 26mm), No space wasted
• Compliant with Serial ATA 1.0a specifications
• Supports Spread Spectrum in receiver
• Compliant with ATA specifications
• Compatible with Ultra ATA 133 / 100 / 66 / 33
• 100% hardware bridge converter to support PC, MAC and Linux environment

Minimum System Requirements

• 100% hardware bridge converter to support PC, MAC and Linux environment

SATA/eSATA II 3.0Gbps PCI Express Host Card
Serial ATA (SATA) is the latest form of computer connectivity, featuring faster transfer speeds, easier configuration, and the ability to hot swap drives. With the Vantec SATA/eSATA PCI Express Host Card, you can add the features and functionality of eSATA to your computer. By providing an internal SATA port, the PCI Express Host Card offers the expanadability to add a hard drive to your system. With the external SATA port, both the PCI Express Host Card gives the flexibility of adding a high speed connection to an external hard drive. Traditionally, one would use USB 2.0 to connect to external hard drives. While USB 2.0 offers reasonably fast speed at 480Mbps, SATA transfers at a speed of up to 3,000Mbps! Take advantage of SATA on your computer with the Vantec SATA/eSATA PCI Express Host Card.

Specifications

• Interface: x1 PCI EXPRESS
  
• Connections:
  - 1x Internal SATA port
  - 1x External SATA (eSATA) port
  
• Dimension: 90mm x 56mm x 12mm (Not including mounting plate)
  
• Pentium or equivalant PC with one available PCI- E slot
  
• Windows 98SE/NT4.0/ME/2000/XP

Features

• Easily add SATA/eSATA to any system with an open PCI-E slot.
  
• Transfer Rates Up to 3Gbps (300MB/s).
  
• Supports Hot-swapping: Plug and play without rebooting!
  
• LED drive activity header for each port.

What's In The Box

PCI Express Host Card User Manual Drivers CD