PC Powerzone - Serving Power Users since 2001 - American owned & operated - No off-shore outsourcing

Serial ATA PCI
High-speed dual-channel PCI-to-Serial ATA host adapter.
Features:

• Compliant with Serial ATA Specification, revision 1.0.
  
• Provides two independent channels to connect up to two Serial ATA hard disk drives.
  
• Supports Serial ATA data transfer rates up to 150MB/sec.
  
• Features independent 2560byte FIFOs per channel for host reads and writes.
  
• Breaks the 137GB barrier! Supports various brands of large capacity Serial ATA hard disk drives.
  
• The thin, flexible Serial ATA cable is easier to route inside a PC.

Includes: ATA PCI board, Serial ATA cable, Serial ATA 15-pin power cable, Serial ATA driver diskette, and quick installation guide.

Specifications:
INTERFACE- 32-bit PCI v2.2
CONNECTORS- (2) Two Serial ATA ports
TRANSFER- up to 150 MB/s

MISC.
Provides two independent channels to connect up to two Serial ATA hard disk drives.

Features independent 256-byte FIFOs per channel for host reads and writes. Features Watch Dog timer for fault resiliency.
Supports 32-bit wide PCI bus at 66MHz.
Lower pin count and voltage requirement, plus better cabling over traditional Parallel ATA make Serial ATA the controller of the future.

COMPATIBLE- Ultra ATA 100/66/33 and EIDE/Fast ATA-2 drives. Co-exists with on-board IDE ports and connects up to 4 IDE hard drives.
APPROVALS- FCC Class B (DoC) & CE

System Requirements:
Pentium or faster with available PCI slot, Windows 98/98SE/ME/NT 4.0/2000/XP.

Warranty:
5 Year Warranty

Convert High Capacity SATA Hard Drive
and SATA Storage Device to operate with IDE Host Controller!
Attaches this Mini size Dangle board to the back of all types of Serial ATA Devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, MO.)and make them become IDE Device to work with IDE host Controller. This Ultra ATA-To-1 Port Serial ATA Converter is the solution for converting a Serial ATA device. It features a Serial ATA port to connect SATA devices such as hard drives, DVD-ROM,or CD-ROM drives to a Parallel ATA interface. It supports Serial ATA tansfer rate of up to 1.5 GB/s and supports Spread Spectrum Receiver.

This Bridge Board is a converter solution for the Serial ATA Device. It has a standard 22 pin SATA port which can interface to a Serial ATA device (hard disk, CDROM, DVD, CD-RW, etc). It accepts Parallel ATA (IDE) commands through the 40 pin IDE connector from the host, decodes the commands and converts them to a Serial ATA commands to the device. Response from the device through the SATA bus are deciphered, processed and converted to a prallel ATA protocol and sent to the host. This Bridge board can support HDD larger than 137GB.

The SATA-to-Ultra ATA/133 Converter Board supports the Serial ATA Generation 1 transfer rate of 1.5 Gb/s (150 MB/s) on the serial ATA side and is compatible with Ultra ATA-133 on the parallel ATA side

 

Specifications

• Compatible with Ultra ATA 133 specifications.
  
• Supports all types of SATA storage devices. (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk, ...)
  
• Complaint with Serial ATA 1.0 specifications.
  
• Supports Serial ATA Generation 1 tranfer rate of 1.5Gb/s.
  
• Supports Spread Spectrum in receiver.
  
• Male/Female Y Large Molex Power connector (8-inch length)
• RoHS Compliant

Features

• Supports any type of SATA150 Device (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk.)
• 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB
• Mini Board size (75mm x 26mm), No space wasted
• Compliant with Serial ATA 1.0a specifications
• Supports Spread Spectrum in receiver
• Compliant with ATA specifications
• Compatible with Ultra ATA 133 / 100 / 66 / 33
• 100% hardware bridge converter to support PC, MAC and Linux environment

Minimum System Requirements

• 100% hardware bridge converter to support PC, MAC and Linux environment

 

Masscool XWT-PCIE10 4-Port SATA PCI Express Card
The SATA II RAID 2 Independent Channels PCI Express Card offers the perfect solution for users who want to add SATA II ports to their desktop computers. The new PCI Express interface effectively quadruples the amount of available computing bandwidth, resulting in faster music downloads, smoother streaming video, and lightning-fast access to mass storage devices.

 

Specifications

• PCI-e 4 port SATA II (SIL3132 Chip)
  
• 2 SATA port internal, 2 SATA port external
  
• Support 1-lane 3 Gb/s PCI Express
  
• Compliant with STAT 1.0 specification
  
• Support SATA II (transfer rate of 3.0Gb/s)
  
• Support 2 Independent SATA Channels

 

• What's In The Box

  Masscool 4-Port SATA (2-External and 2-Internal) PCI Express Card
• Installation Disk
• (2) Two SATA Cables
• SATA Power Connector