PC Powerzone - Serving Power Users since 2001 - American owned & operated - No off-shore outsourcing

Optimize WLAN Range and Power
NETGEAR?s line of antennas and accessories gives you multiple options for maximizing the reach and performance of your wireless devices. Every WLAN deployment is unique. When planning a network that incorporates wireless, varying facility sizes, construction materials, distance between transmission points and physical obstructions must be accounted for. With both directional and omni-directional antennas (also referred to as range extenders), low-loss cables, mounting hardware, and other accessories, installers can customize a wireless solution that meets the requirements of even the most challenging applications.

18 dBi Patch Panel Directional Antenna
This indoor/outdoor directional* antenna provides a 3-in-1 solution for mixed applications in combination with an 802.11b or 802.11g access point or wireless router. One, it delivers extended access point range in a single floor environment ideally positioned in the corner of a building. Two, it functions point-to-point so that you can wirelessly connect LANs between the buildings in a campus-type environment. Three, it provides multifloor transmission when placed on a ceiling, as the higher power output extends the range through typical flooring materials. Includes several mounting options (fixed wall, wall adjustable, and pole), cable sold separately.

* Directional: Concentrates transmit and receive radio-frequency energy into a cone, or beam, for higher signal strength and reception.

Features:
Connects to NETGEAR ME103, FVM318 and FWAG114
18 dBi antenna gain for the 2.4 GHz frequency range
Corrosion-proof and weather resistant
Range: Up to 10 miles (15.8 km)*
* Range estimation is based on two wireless nodes each with an ANT24D18 antenna attached, a NETGEAR 3 m low-loss antenna cable, 10 dBI link budget margin, associating wtih each other at 11 Mbps under ideal line-of-sight conditions.

SPECIFICATIONS:
Description: 18 dBi Patch Panel Directional Antenna with reverse N female jack and reverse N to reverse SMA adapter
Typical Application: Indoor/outdoor long range point-to-point connections
Maximum Outdoor Range^: 15.8 km (~9.8 miles)
Frequency Range: 2.45 ñ 50 MHz
Gain^^: 18 dBi
Beam Width: Horizontal 60ø Vertical 30ø
Dimensions: 262.8 x 262.8 x 40 mm (10.35 x 10.35 x 1.58 in)

Package Contents:
?18 dBi Patch Panel Directional Antenna - ANT24D18
?Wall and ceiling mount brackets and hanging materials
?One reverse N type to reverse SMA adapter
?Installation Guide
?Warranty card
?Support information card

Warranty and Support:
2 year

NOTE:To obtain optimal results in extending wireless range with antenna installations, it is recommended that a qualified professional installer is consulted for site survey and proper installation.

For EU, use of any antenna requires careful planning and extra consideration to comply with EU emissions and health standards and regulations. It is recommended that a qualified professional installer service is consulted for site survey and proper installation. Antenna installation must comply with the maximum level authorized by each country.

^ Range estimations are based on two wireless nodes, each with an ANT24D18 antenna attached, associating with each other, at 11 Mbps under ideal line-of-sight conditions.
^^ Gain: A ratio of decibels to an isotropic antenna that is commonly used to measure antenna coverage.