NZXT PHAN-002GR Phantom Full-Tower Case

NZXT presents the cutting edge NZXT PHAN-002GR Phantom Full-Tower Case. Designed with sleek, pristine contours, the NZXT PHAN-002GR Phantom Full-Tower Case radiates personality and quality. As with all NZXT products, we strive to set apart our customers from the rest with unique, original designs ? we run the extra mile so you won?t have to settle with the typical rectangular box.

The NZXT PHAN-002GR Phantom Full-Tower Case delivers high performance cooling advantages with 7 fan cooling options, dual radiator support, quad watercooling cutouts, and five 20W per channel fan controls. An innovative 5.25? screwless system, vast space to encompass 7 hard drives, and five 5.25? bays enable smooth customization. Establish your power, your presence.

What It Is And Why You Need It:

High Performance Cooling Advantages with 120, 140 and 200mm Fan Ports.

Extensive Motherboard Compatibility and Expandability and simple installation.

Easily removable front and top panels, and top mounted USB, Audio/Mic, and E-SATA ports.

Meticulous wire management is easily attainable with large spacing behind the motherboard.

Rubber PSU and case feet to reduce vibration, easily removable front and top panels.

Specifications

Form Factor: ATX Full-Tower

Compatible Motherboards:

-ATX

-Micro ATX

-Baby AT

-Extended ATX

Bezel Type: Plastic

Side Panel Type: Vented

Material: Steel

Special Features:

*Front eSATA

*200mm LED Fan

External 5.25" Drive Bays: 5

External 3.5" Drive Bays: 0

Internal 3.5" Drive Bays: 7

Expansion Slots: 7

Front USB Ports: 2

Front FireWire Ports: None

Front Audio Ports: 2

120mm Fan Ports: 3

120mm Fans Included: 3

140mm Fan Ports: 1

140mm Fans Included: None

Other Fan Ports: 3x 200mm Fan Ports

Other Fans Included: 1x 200mm Fan

Detailed Features

High Performance Cooling Advantages

Phantom?s extensive cooling capabilities include 7 fan cooling options with dual 200mm, single 230/200mm, triple 120mm, and front 140mm fans.For enhanced control and expandability, NZXT includes dual radiator support, quad watercooling cutouts, and an integrated fan controller with up to five 20W channels.

Simple Installation

Phantom celebrates an array of innovative features designed to enhance every stage of the build. Meticulous wire management is easily attainable with large spacing behind the motherboard. The innovative all-new 5.25? screwless rails make installing and swapping HDDs an effortless process. Rubber grommets dampens vibration during operation.

Additional Advanced Features

Further distinct features include an LED on/off button to control fan lighting, rubber PSU and case feet to reduce vibration, easily removable front and top panels, and top mounted USB, Audio/Mic, and E-SATA ports.

Extensive Compatibility and Expandability

Features support for larger heat sinks, graphics cards, and E-ATX motherboards enabling enthusiasts to include any of today?s hottest components. Vast space within the enclosure allows for 7 hard drives with SDD support and up to five 5.25? bays.

***Assembling Barebones Computer Kits & Computer Cases

Remember when assembling one of our money-saving Barebone Computer Kits, or installing your existing computer components into a new computer case, you may have to modify the case to fit your components - This Is Normal! Cases are designed to hold and accommodate a wide variety of motherboards, interface cards, connectors, and other components. Because of this, the case manufacturer designs their cases with easily removable panels to allow these components to properly fit in the case. All you need to do is punch them out with a screw driver or fold them over with a pair of pliers to snap out the metal piece for your exact components. In this way, you save the cost of assembling your computer, and have the satisfaction of building your own workstation.

PLEASE NOTE: Carefully read all documentation BEFORE you start to assemble your Barebones Kit or add components to a Computer Case. Some components need to be assembled in a specific order. Also place the components in the case temporarily to confirm any modifications (punch outs) that need to be made to fit that component.

Azza CSAZ-1000 Solano 1000 Full Tower Gaming Case

This Azza CSAZ-1000 Solano 1000 Full Tower Gaming Case offers functionality and performance. The Azza CSAZ-1000 Solano 1000 Full Tower Gaming Case supports E-ATX, ATX, and Micro ATX motherboards and the thumb screw design allows for easy installation of seven PCI expansion cards without tools. The Azza CSAZ-1000 Solano 1000 Full Tower Gaming Case featuers a plethora of drives bays, including up to ten 5.25" and eight 3.5" bays, allow you to grow your system over time. Purchase the Azza CSAZ-1000 Solano 1000 Full Tower Gaming Case today!

What It Is and Why You Need It:

Supports E-ATX, ATX, and Micro ATX motherboards

Ultra-efficiency Cooling System

Three USB ports and one eSATA port

Specifications

Form Factor: ATX Full-Tower

Compatible Motherboards:

ATX

Micro ATX

E-ATX

Material: SECC Steel

External 5.25" Drive Bays: 10

External 3.5" Drive Bays: 1

Internal 3.5" Drive Bays: 8

Expansion Slots: 7

Front USB Ports: 3

120mm Fans Included: 1

140mm Fans Included: 1

Other Fans Included: 2x 230mm Fans

Depth: 21.5"

Width: 8.1"

Height: 19.7"

Features

Ultra-efficiency Cooling System:

1x 230mm top fan with 3-speed switch control

1x 230mm side fan

2x 140mm front fans

1x 120mm rear fan

Bottom-mounted Power Supply: Power supply is bottom-mounted, can be installed facing either up or down. Pre-drilled holes located at bottom, allowing efficient air flow when power supply is installed facing downward

Cable Management: Cable is organized behind the pre-drilled motherboard tray, allowing better cable routing and internal air flow

Easy Assembling: Thumb screw design for easy assembling of optical drive and HDD; thumb screw design also for the side panel

Maximum Compatibility: Compatible with E-ATX, ATX, Micro ATX and all kinds of Nvidia, ATI long graphic card, and most water cooling systems.Server-like HDD cage can accommodate up to 8 HDD, equipped with 2 x 140mm front fans for overheat prevention

USB & Audio Ports Located on Top: USB & eSATA & audio ports located on the top panel, allowing easy access

***Assembling Barebones Computer Kits & Computer Cases

Remember when assembling one of our money-saving Barebone Computer Kits, or installing your existing computer components into a new computer case, you may have to modify the case to fit your components - This Is Normal! Cases are designed to hold and accommodate a wide variety of motherboards, interface cards, connectors, and other components. Because of this, the case manufacturer designs their cases with easily removable panels to allow these components to properly fit in the case. All you need to do is punch them out with a screw driver or fold them over with a pair of pliers to snap out the metal piece for your exact components. In this way, you save the cost of assembling your computer, and have the satisfaction of building your own workstation.

PLEASE NOTE: Carefully read all documentation BEFORE you start to assemble your Barebones Kit or add components to a Computer Case. Some components need to be assembled in a specific order. Also place the components in the case temporarily to confirm any modifications (punch outs) that need to be made to fit that component.

Cooler Master RC-932-KKN5-GP HAF 932 Full Tower Case

With pure innovative strength, Cooler Master, the leader in enthusiast computer components, has unleashed yet another prevailing arsenal to compete in the full-tower chassis segment. Proud and robust in its appearance, the HAF 932 presents its sturdy sentinel housing and revolutionary High Air Flow structure to enhance and protect any hardware component that is worthy of the highest performance.

What It Is And Why You Need It:

The HAF932 features a fully-rugged appearance and is housed in a tough casing to offer outstanding protection.

A rugged HAF932 comes equipped to operate with unparalleled thermal performance.

Patented finger-press buttons for quickly maintaining or upgrading 5.25 inch drive devices.

Features two SuperSpeed USB 3.0 connectors at the front, for speeds ten times faster than conventional USB 2.0 (requires Motherboard or Expansion Card with USB 3.0 support).

Removable HDD racks and cable management system for better cable routing and neatness.

New Black Interior gives the HAF 932 an upscale look; this case means business!

Specifications

Compatible Motherboards: ATX, Micro ATX and Extended ATX

Materials: Plastic and Steel

External 5.25" Drive Bays: 6

Internal 3.5" Drive Bays: 5

Expansion Slots: 7

Front USB Ports: 4

Front FireWire Ports: 1

140mm Fan Ports: 1

Other Fan Ports: 3 x 230mm Fan Ports

Other Fans Included: 3 x 230mm Fans

Depth: 22.7"

Width: 9.0"

Height: 21.5"

***Assembling Barebones Computer Kits & Computer Cases

Remember when assembling one of our money-saving Barebone Computer Kits, or installing your existing computer components into a new computer case, you may have to modify the case to fit your components - This Is Normal! Cases are designed to hold and accommodate a wide variety of motherboards, interface cards, connectors, and other components. Because of this, the case manufacturer designs their cases with easily removable panels to allow these components to properly fit in the case. All you need to do is punch them out with a screw driver or fold them over with a pair of pliers to snap out the metal piece for your exact components. In this way, you save the cost of assembling your computer, and have the satisfaction of building your own workstation.

PLEASE NOTE: Carefully read all documentation BEFORE you start to assemble your Barebones Kit or add components to a Computer Case. Some components need to be assembled in a specific order. Also place the components in the case temporarily to confirm any modifications (punch outs) that need to be made to fit that component.