Azza CSAZ-1000 Solano 1000 Full Tower Gaming Case

This Azza CSAZ-1000 Solano 1000 Full Tower Gaming Case offers functionality and performance. The Azza CSAZ-1000 Solano 1000 Full Tower Gaming Case supports E-ATX, ATX, and Micro ATX motherboards and the thumb screw design allows for easy installation of seven PCI expansion cards without tools. The Azza CSAZ-1000 Solano 1000 Full Tower Gaming Case featuers a plethora of drives bays, including up to ten 5.25" and eight 3.5" bays, allow you to grow your system over time. Purchase the Azza CSAZ-1000 Solano 1000 Full Tower Gaming Case today!

What It Is and Why You Need It:

Supports E-ATX, ATX, and Micro ATX motherboards

Ultra-efficiency Cooling System

Three USB ports and one eSATA port

Specifications

Form Factor: ATX Full-Tower

Compatible Motherboards:

ATX

Micro ATX

E-ATX

Material: SECC Steel

External 5.25" Drive Bays: 10

External 3.5" Drive Bays: 1

Internal 3.5" Drive Bays: 8

Expansion Slots: 7

Front USB Ports: 3

120mm Fans Included: 1

140mm Fans Included: 1

Other Fans Included: 2x 230mm Fans

Depth: 21.5"

Width: 8.1"

Height: 19.7"

Features

Ultra-efficiency Cooling System:

1x 230mm top fan with 3-speed switch control

1x 230mm side fan

2x 140mm front fans

1x 120mm rear fan

Bottom-mounted Power Supply: Power supply is bottom-mounted, can be installed facing either up or down. Pre-drilled holes located at bottom, allowing efficient air flow when power supply is installed facing downward

Cable Management: Cable is organized behind the pre-drilled motherboard tray, allowing better cable routing and internal air flow

Easy Assembling: Thumb screw design for easy assembling of optical drive and HDD; thumb screw design also for the side panel

Maximum Compatibility: Compatible with E-ATX, ATX, Micro ATX and all kinds of Nvidia, ATI long graphic card, and most water cooling systems.Server-like HDD cage can accommodate up to 8 HDD, equipped with 2 x 140mm front fans for overheat prevention

USB & Audio Ports Located on Top: USB & eSATA & audio ports located on the top panel, allowing easy access

***Assembling Barebones Computer Kits & Computer Cases

Remember when assembling one of our money-saving Barebone Computer Kits, or installing your existing computer components into a new computer case, you may have to modify the case to fit your components - This Is Normal! Cases are designed to hold and accommodate a wide variety of motherboards, interface cards, connectors, and other components. Because of this, the case manufacturer designs their cases with easily removable panels to allow these components to properly fit in the case. All you need to do is punch them out with a screw driver or fold them over with a pair of pliers to snap out the metal piece for your exact components. In this way, you save the cost of assembling your computer, and have the satisfaction of building your own workstation.

PLEASE NOTE: Carefully read all documentation BEFORE you start to assemble your Barebones Kit or add components to a Computer Case. Some components need to be assembled in a specific order. Also place the components in the case temporarily to confirm any modifications (punch outs) that need to be made to fit that component.

Cooler Master HAF 932 Advance ATX Full Tow Bundle

This Bundle Includes:

Cooler Master RC-932-KKN5-GP HAF 932 Advance Full Tower Case - ATX, Black, SuperSpeed USB 3.0

Corsair TX850W Power Supply - 850W, ATX, 80Plus

Cooler Master RC-932-KKN5-GP HAF 932 Full Tower Case

With pure innovative strength, Cooler Master, the leader in enthusiast computer components, has unleashed yet another prevailing arsenal to compete in the full-tower chassis segment. Proud and robust in its appearance, the HAF 932 presents its sturdy sentinel housing and revolutionary High Air Flow structure to enhance and protect any hardware component that is worthy of the highest performance.

What It Is And Why You Need It:

The HAF932 features a fully-rugged appearance and is housed in a tough casing to offer outstanding protection.

A rugged HAF932 comes equipped to operate with unparalleled thermal performance.

Patented finger-press buttons for quickly maintaining or upgrading 5.25 inch drive devices.

Features two SuperSpeed USB 3.0 connectors at the front, for speeds ten times faster than conventional USB 2.0 (requires Motherboard or Expansion Card with USB 3.0 support).

Removable HDD racks and cable management system for better cable routing and neatness.

New Black Interior gives the HAF 932 an upscale look; this case means business!

Corsair TX850W Power Supply - Qty: 1

Voted Best Power Supply Manufacturer by CustomPC 2009

The Corsair TX power supplies are engineered using advanced technology and components typically found with high performance power supplies. With design features such as a dedicated, single +12V rail offer the maximum compatibility with the latest system components. Energy efficient circuitry capable of delivering greater than 80% efficiency ratings across 20%, 50%, and 100% load conditions make the TX family of PSUs ideal for the value/quality conscious enthusiast. With a large diameter temperature-controlled fan that is ultra quiet, yet still more than sufficient to cool the internals of the system, reliability and stability are no longer worries for the gamer, overclocker or enthusiast and high-end system builder.



Specifications

Cooler Master HAF 932 Advance ATX Full Tower Case - Qty: 1

Compatible Motherboards:

ATX

Micro ATX

Extended ATX

Materials:

Plastic

Steel

External 5.25" Drive Bays: 6

Internal 3.5" Drive Bays: 5

Expansion Slots: 7

Front USB Ports: 4

Front FireWire Ports: 1

140mm Fan Ports: 1

Other Fan Ports: 3 x 230mm Fan Ports

Other Fans Included: 3 x 230mm Fans

Depth: 22.7"

Width: 9.0"

Height: 21.5"

Corsair TX850W Power Supply - Qty: 1

Form Factor: ATX

Wattage: 850W

Modular Cabling: No

Energy Efficiency: 80 PLUS

Input Voltage: 115 ~ 230

+3.3V: 30 A

+5V: 30 A

+12V 1: 70 A

+12V Rails: 1

-12V: 0.8 A

+5VSB: 3 A

20+4-Pin Connector: 1

Motherboard Connector: 24-Pin

4-Pin/8-Pin EPS Connector: 1

6-Pin/8-Pin PCI-Express Connector: 4

4-Pin Floppy Connector: 2

4-Pin Peripheral Connector: 8

SATA Power Connector: 8

***Assembling Barebones Computer Kits & Computer Cases

Remember when assembling one of our money-saving Barebone Computer Kits, or installing your existing computer components into a new computer case, you may have to modify the case to fit your components - This Is Normal! Cases are designed to hold and accommodate a wide variety of motherboards, interface cards, connectors, and other components. Because of this, the case manufacturer designs their cases with easily removable panels to allow these components to properly fit in the case. All you need to do is punch them out with a screw driver or fold them over with a pair of pliers to snap out the metal piece for your exact components. In this way, you save the cost of assembling your computer, and have the satisfaction of building your own workstation.

PLEASE NOTE: Carefully read all documentation BEFORE you start to assemble your Barebones Kit or add components to a Computer Case. Some components need to be assembled in a specific order. Also place the components in the case temporarily to confirm any modifications (punch outs) that need to be made to fit that component.

Thermaltake VN300M1W2N Chaser MK-I Full Tower Gaming Case

The Thermaltake VN300M1W2N Chaser MK-I Full Tower Gaming Case should end your unremitting compromise between value and budget! With performance, features, and quality found only in high-end cases, designed with an eye-catching exterior, Thermaltake invites you to build your next power rig with the Thermaltake VN300M1W2N Chaser MK-I Full Tower Gaming Case.

This Thermaltake VN300M1W2N Chaser MK-I Full Tower Gaming Case has massive storage capacity, with four external 5.25" drive bays, internal 3.5" drive bays, and eight expansion slots. The Thermaltake VN300M1W2N Chaser MK-I Full Tower Gaming Case can accommodate Micro ATX and ATX motherboards and is enthusiasts water cooling ready . In addition, the Thermaltake VN300M1W2N Chaser MK-I Full Tower Gaming Case features colorshift. With fan controller onboard, gamer and enthusiasts can appreciate the convenience of adjusting the fan speed or lighting effect of the computer system. Purchase the Thermaltake VN300M1W2N Chaser MK-I Full Tower Gaming Case today!

What It Is and Why You Need It:

Compatible with ATX and Micro ATX motherboards

Water Coolin Ready

Hard Drive Docking Station

USB 3.0 Ports

Colorshift LEDs

Specifications

Form Factor: ATX Full-Tower

Compatible Motherboards: ATX and Micro ATX

Side Panel Type: Swivel Door with Tranparent Window

Material: SECC

Special Features: Multicolor LED Fans

External 5.25" Drive Bays: 4

Internal 3.5" Drive Bays: 6

Expansion Slots: 8

Front USB Ports: 4

140mm Fans Included: 1

Other Fans Included: 2x 200mm Fans

Depth: 22.9"

Width: 9.3"

Height: 22.4"

Features

Command Center: With Chaser MK-1?s fan controller onboard, gamer and enthusiasts can appreciate the convenience of adjusting the fan speed or lighting effect of the computer system.

USB 3.0 SuperSpeed: Tired of reaching to the back of the computer to connect a USB 3.0 device? Chaser MK-1 features latest USB 3.0 ports with internal header. Two USB 3.0 ports are conveniently located on the front of the case.

HDD Docking Station: By adapting world?s best selling BlacX Docking Station concept into a computer case, users can now effortlessly transfer large volume of data without the need for a conventional external storage device. Simply insert any 2.5? or 3.5? SATA hard drive into the docking station and start enjoying hot-swap capability and blazing-fast transfer speed through SATA interface.

VGA TripleMax 33CM: All of today?s high-end and advanced graphic cards that are capable of delivering ultra-realistic, immersive and intense gaming experience have longer than usual form factor which means not all computer case will fit. Chaser MK-1 not only address this concern by supporting graphic card up to 330mm in length, but also designed cooling surrounding the graphic card location to improve heat dissipation and reduce acoustic output.

CableClear Cable Management: Dramatically improves thermal efficiency of the computer system by ensuring power cables do not get in the way of airflow.

Enthusiasts Water Cooling ReadyUS: Spacious interior is only the bare minimum when it comes to water cooling. Chaser MK-1 features an innovative top removable panel that can be easily transformed to accommodate high-efficiency 24cm radiator!

Combat Headset Holder: Headset holder designed into the case allows gamers to store their gaming headset easily and securely.

Heightened Foot Stands: High thermal efficiency case that address all common and uncommon issues. Heighten foot stands elevate the whole computer system enough to prevent rug or any other soft flooring material from blocking the air intake/exhaust found on the bottom of the case.

***Assembling Barebones Computer Kits & Computer Cases

Remember when assembling one of our money-saving Barebone Computer Kits, or installing your existing computer components into a new computer case, you may have to modify the case to fit your components - This Is Normal! Cases are designed to hold and accommodate a wide variety of motherboards, interface cards, connectors, and other components. Because of this, the case manufacturer designs their cases with easily removable panels to allow these components to properly fit in the case. All you need to do is punch them out with a screw driver or fold them over with a pair of pliers to snap out the metal piece for your exact components. In this way, you save the cost of assembling your computer, and have the satisfaction of building your own workstation.

PLEASE NOTE: Carefully read all documentation BEFORE you start to assemble your Barebones Kit or add components to a Computer Case. Some components need to be assembled in a specific order. Also place the components in the case temporarily to confirm any modifications (punch outs) that need to be made to fit that component.