PC Powerzone - Serving Power Users since 2001 - American owned & operated - No off-shore outsourcing

The YX610-PCS-CEL Pro-Pack Series is a Bi-directional Amplifier (BDA) System which captures and amplifies the cell signal to extend a cell zone up to 10,000 square feet. The YX600/610 Pro-Pack Series is designed for the professional installer and is available for either the 800 MHz Cellular, 1900 MHz PCS, or Dual Band (both 800 and 1900 MHz bands simultaneously). You must either buy a Dual Band, which will cover all frequencies (except Nextel) or buy the correct model to match your provider's frequency – 800MHz or 1900Mhz. Visit WirelessAdvisor to determine the carrier frequency for the installation area (being dual band, all US cell phones other than Nextel will work with this cell phone booster model).

Benefits include:

• YX600-PCS model improves all 6 PCS sub-bands
  
• YX600-CEL model improves both Cellular sub-bands
  
• YX610-PCS-CEL model improves both 800 MHz and 1900 MHz bands
  
• Increases your indoor cell signal coverage – up to 10,000 sq feet
  
• Decreases dropped or missed calls
  
• Stay wireless - no cradle or connections to your phone
  
• Extends phone battery life (uses less power when signal is stronger)
  
• Works with most phones and carriers (maintains network integrity)
  
• zBoost is Manufactured in the USA by Wireless Extenders with the highest quality control – (individually-calibrated)
  
  Handles all PCS and/or CEL protocols and includes multiple patent pending technologies to provide low-cost coverage while continually adapting to signals to prevent interference and remain transparent to the wireless network. Provides an indicator if the antennas are positioned improperly, but will NOT suffer damage or interfere with the Carrier Network.
  
  

  Wireless Extenders Cell Phone Signal Booster Dual Band (works with most cell phones)
  62% of all cell phone users can not use thier cell phones at home unless they monkey around and do something special such as hang out a window, sit in a closet or stand on a chair in order to get a cell signal. Zboost Cell phone extenders stop this, once installed you will have full cell bars in all rooms of your house or office.

  
  Designed for consumers, the zBoost cell phone signal booster extends a zBoost Cell Zone for single or multiple users in homes or offices. Dual-Band model covers all phones except Nextel (will work with Nextel voice calls.. not data). This zboost cell phone signal booster package includes everything you need -- amplifier base unit, power supply, base unit antenna, low-loss SATV coaxial cable (RG6), signal antenna and the mounting hardware. The omni-directional antennas are easy to orient and receive from multiple cell towers. Desgined to be easy to install, anyone with basic skills can install the zboost.

  Everyone has dead spots in their home or office where cell phones refuse to work. Many locations have more cell dead zones than actual usable signal. The Cell phone signal booster will eliminate the cell phone dead zones in your home and extend a strong signal throughout your entire home or workspace.

  How does it Work?
  Simple, mount your wireless extender cell phone signal booster receiving antenna in a location that has full bars, or full signal reception. This may be outside, in your closet or maybe even in your attic. This good signal will be amplified and then redistributed within your home, office or warehouse in which your are using the signal booster in.

  Now you can stop walking around your house, up and down the stairs trying to find that oddball place that your phone will actually work in!
  
  Features:

  
  
  • zBoost Dual-band model improves all 6 PCS sub-bands and both Cellular sub-bands
    
  • Increases your indoor cell signal coverage – up to 10,000 square feet
    
  • Decreases dropped or missed calls
    
  • Staying wireless - no cradle or connections to your phone
    
  • Extends phone battery life (uses less power when signal is stronger)
    
  • Works with all phones and carriers (except nextel) and maintains network integrity
    
  • Manufactured in the USA with the highest quality control – (individually calibrated)
  
  
  Warranty: 1 Year Warranty

NOTE: THIS MODEL OF BOOSTER IS MADE FOR PROFESSIONAL INSTALLERS ONLY! DOES NOT INCLUDE COAX CABLE FOR THE INSTALLATION. FOR EXPERIENCED INSTALLERS OR MECHANICALLY INCLINED INSTALLERS.

YX610-PCS-CEL Specifications
Frequency: Downlink- 1930-1990 MHz 869-894 MHz; Uplink-1850-1910 MHz 824-849 MHz
PCS Bands: ALL: A,D,B,E,F & C
Network Format: CDMA, GSM, TDMA, GPRS, EDGE, 1xRTT, EV-DO, HSDPA
System Gain: Downlink: 69 dB; 66 dB
Composite Output Power Limit -EiRP Downlink: 15 dBm; Uplink: 32 dBm
Noise Figure:Downlink: 5 dB; Uplink: 5 dB
Third Order Intercept: Downlink: 34 dBm; Uplink: 50 dBm
Signal Delay: Downlink: 130 ns; Uplink: 140 ns
Antenna Signal: PCS - 13 dBi Panel; F-type female CEL - 7 dBi Yagi; F-type female
Antenna – Base Unit 7 dBi Patch; TNC male
Cable Loss: 3000 MHz RG-6, approximately 1 dB/10 ft.

Increase your cell phones range by using one of our Cell Phone Booster kits. Many homes which have metal siding or roofs can not get adequate cell phone coverage inside of the home, these booster kits resolve this issue. Install the included receiving antenna outdoors in a location where your cell signal is good, the booster will then amplify this existing signal and then re-broadcast it through your entire home. No more dead spots!

What is the zboost Cell Phone Signal Booster?
The zboost cell phone booster is a product that is designed to fix bad cell phone reception in any home or office. Each zboost booster comes with a receiving antenna which will be mounted either outdoors or inside your building. This receiving antenna picks up your cell phone signal... boosts it and rebroadcasts it throughout your entire home (up to 2000sq ft), eliminating those cell phone dead zones that most of us experience.

Who is the zboost cell phone booster meant for?
Everybody! 62% of all people have problems with getting a decent signal in their homes and have to monkey around in strange ways to get their phones to work. The zboost eliminates this for good.

Are there any wires that have to be plugged into my phone for the zboost to work?
Nothing will be installed on your phone. Mount your zboost cell booster one time (does not have anything to install on your phone, or connect to your phone) and forget about it. Use your cell phone like you would normally, multiple cell phones can be used as well.

I have to move around hunting for a pocket of cell signal in order to use my cell phone. Will this cell phone booster work for me?
If you have any spots of good signal strength at your location, you will simply mount your receiving antenna for the cell phone extender at the "strong signal" location. This pocket of strong signal will be amplified and redistributed in your building.

I can't get any bars on my cell phone; will this cell phone booster help?
Walk around your property while watching the signal strength meter on your cell phone. This is the easiest means of locating a pocket of stronger signal strength, which can be utilized by the Wireless Extender Cell Phone Booster.

If you are unable to find a signal the Wireless Extenders Cell Phone Booster will not have a signal to work with. There must be some usable signal somewhere at your location, which can be accessed by the Cell Phone Booster in order for this Cell Phone Booster to work properly.

What is the best recommended mounting location for the zboost cell phone booster?
In our experience, we have found that mounting the receiving antenna outdoors, at least 3ft above your roof line will usually provide the best possible performance. The zboost will take this signal, amplify it and repeat or rebroadcast it into your home (or office). There is plenty of coax cable included with your zboost kit, don't be afraid to use it.

What if I have a problem so bad that my Zboost will not even resolve?
This is rare, but does occasionally happen. PcPowerZone allows our zboost customers a 15 day return window once you receive your booster. If it turns out that you happen to be one of the few people that can not benefit from a booster we will gladly allow a return within this 15 day period, but please note... we will have to charge our standard 20% restocking fee. Please make sure to have all of your wires, cables, papers and the retail box since we must have these in order to accept any return.

How do I tell what frequency my cell phone operates on to be sure that it works with the zboost cell phone signal booster?
Go to the Wireless Advisor website and enter your zip code into the space provided... the cell phone provides in your area will be shown, as well as the frequency that your cell phone provider is using.